Title: Dead Cells + Rise of Giant
Release Date: May 24, 2019
Category: Action, Platformer
Publisher: Motion Twin
Type: eShop
Format: NSP
Title ID: 0100646009FBE000
Title Size: 750 MB
Language: En, Fr, De, It, Es
Required Firmware: 7.0.1
CFW: 7.0.1 + Atmosphere 0.8.7
Indie hit Dead Cells NSP just got even bigger and better thanks to a new, free piece of DLC called ‘Rise of the Giant NSP’.
Description: Use your alchemic abilities to escape the island in this brutally challenging 2D action-platformer with no checkpoints. You’ll get better. eventually. Dead Cells puts you in control of a failed alchemic experiment trying to figure out what’s happening on a sprawling, ever-changing and seemingly cursed Island. Tough but fair combat, responsive controls, challenging foes, permadeath and of course, the emergency panic roll to get you out of trouble, make for a demanding, visceral and cathartic action game.
Experience a Roguevania, mixing an interconnected world, branching paths and unlockable skills with the constant adrenaline-pumping threat of permadeath. No checkpoints. You either vanquish the final boss in one go, or you try again. However, you keep some of your progress for successive runs; new paths you’ve unlocked, access to new levels, mutations, abilities and weapons. Speaking of weapons, Dead Cells features a plethora of ways to slay your enemies. A large variety of swords, bows and of course spells, but also whips, grenades and turrets, each one with its own unique twist. Plus, mutations and scrolls allow you to build and customize your character differently with each and every run.
How to Install the Game
- Install the NSP via Tinfoil, or DBI Installer.
- Once installations is done play and Enjoy the game.
Gameplay Video
Checkout the below gameplay video with latest update 1.80 running on FW 10.0.4.
Download Links
Region ASIA [0100FC000AEF0000] [Ja, Es, Fr, Pt, Ru, Ko, Zh]
DLC Pack (2 DLCs)
Region USA [0100646009FBE000] [En, Fr, De, It, Es]
DLC Pack (4 DLCs)(Updated)
Please report the broken/dead/missing links into the comment section.
How long we have update boss rush admin?
ADded Now.
Hi. I am on firmware 14.1.2 and latest atmosphere and sigpatches (downloaded after 15.0.0 FW was released). The game crashes on launch both on updates 1.20.1 and 1.20.2. Installed via Awoo installer. Any tips on how to run this game?
Install it again via Tinfoil only.
Hi
Never get issue with any game but with this one when I install the update I can’t lauch the game (The game is launching then close with an error)
If I just install the Base Game I can play it but not with the 1.20.1 update
I got the last ATM & Tinfoil update
Tried everything and I can’t find any solution … 🙁
You forgot to mention the firmware versions.
Yup ! And that was it damn ! Didn’t see your answer but I tried 1 hour after my post and it’s good 🙂 Thanks ! Maybe i’ll help someone with this post
What was the solution?. I have the same setup as you, on firmware 14.1.2. Every other game works, but this just closes down. Do I need firmware 15.0.0 for this new update?
Hey I got a problem, I downloaded base game, update and dlcs and installed them via Quark and Goldleaf, but whenever I try to start the game it crashes. All the other games I downloaded work fine, but with dead cells there seems to be an issue somehow. I also tried re-installing it but it doesn’t work somehow. Would be nice if someone could help me
Use Tinfoil and leave the Gold Leaf behind it wont work with many new files.
looking for update 2293760
Added Now.
Can you add 30th update “Enter the Panchaku”, released today?
Not seeing this update at the moment.
Please upload the updates. Thank you.
Added Now.
New update just came out. [v2293760]
Added Now.
Thank you, everything works. Also could you please upload a game called Islets which will release August 24th this year?
Still 3 days left so wait for it.
The game they mentioned is out now. https://www.nintendo.com/store/products/islets-switch/
Its here: https://nxbrew.com/islets-switch-nsp-eshop/
Its out now!
Its here: https://nxbrew.com/islets-switch-nsp-eshop/
Hello,
None of the links for the “DLC Pack (4)” for the USA region seem to be working. Thanks much.
New links are added now.
Hi, can you add link to recent update/patch? The one adding accessibility features. Showed up few days ago AFAIK.
Update 1.19.0 is the recent and it is already up.
Thank you, works like a charm. This is the best site if your looking for recent NSW stuff or updates/patches, bar none. No question about it. Hope you’re well!
Thank you man.
Hello ! Link : Update 1.18.0 (v1966080) – 1Fichier = 404 Not Found
New update is added now.
New update “Break the Bank” came out yesterday! Would be great if we can get this. Thanks a million!
Added Now.
Works great! You da man!
Welcome.
Hi, can you add the v 1.17.2
Added Now.
Hi,
i just want to ask when we can except that the new Update an DLC is available for download here?
Update: 1.17.1
DLC: The Queen and the Sea
Added now.
Any possibility of uploading the new DLC?
Added now.
The game was recently updated to include the DLC “The Queen and the Sea”, can you update the links to include it?
Added now.
You guys got the new update + dlc?
Added now.
Will you add the last DLC, released as of yesterday? Thank you in advance!
Added now.
New DLC “The Queen and the Sea” (released Jan 5th 2022) is out! Any chance we can get this?
Million thanks in advance!
Added now.
Thanks a lot buddy! Works perfectly!
I trying to download and i stay on the page CtDLX and i dont get the link, how can i continue?
Try changing browser.
There’s a new update to fix the long load times and other bugs that was introduced on 1.16.0. Possible to get this?
Did you bothered to check below the update area?
I’m sorry. I’m looking at this on a mobile and this is all I see…
The text in red are the actual download links.
I’ve clicked everywhere on your site and I can’t find it. This is a new update (26.1) that was just released today that fixes major bugs with the 26.0 update.
https://twitter.com/motiontwin/status/1466810889248686083?s=20
New update added.
Thank you so much! You da man!
Finish your current run before you update. After update, even though I chose “Continue”, it took me back to the beginning… I was at the end of Undying Shores too… gah!
Update No. 26 “Everyone is here” (newer than version 1.15.1) was just released on Switch. Is it possible to add link for this patch?
Update is added now.
OMG, thank you very much. You’re breathtaking.
Reminds me of the Xbox E3.
Update 25 was released on Sept. 16th.
Can that please be added?
Added now.
Thank you very much
sorry to bother you, but where is update 25 listed? i can only see 1.15.0 for region usa.
New update 1.15.1 is added now.
Can you add the the newest update?
When this update is released?
Cannot install the latest update 🙁 (1.13.0)
Whats the exact error?
Can you please add the “Whack a Mole” latest update?
Thank you!
New update is added now.
dlc MEGA dead
For god sake use other hosts i use mirrors to keep the game topic active reupping MEGA will only waste time as they will suspend account in matter of minutes.
Mega is always Dead. few minutes of upload and it will be down. use 1Fichier
Will you uploud the DLC to Dead Cells (Fatal Falls)?
Added now.
fatall falls DLC is out!
Added now.
There is a new patch, 1.11.2, and a new DLC – Fatal Falls. Thanks!
Added now.
are you going to add fatal falls dlc as well?
Added now.
Hi! Can you please add the new DLC? (Fatal Falls)
Added now.
I can download and install the game just fine, but when I open it, it doesnt work because its stuck at the nintendo switch screen, what can i do?
Always mention FW and CFW version along with install tool to report issue.
Can you upload the latest patch. The other sources have a corrupt update. Thanks!
Added now.
Hi! There is something wrong with Bad Seed dlc, I tried it on mediafire and 1fischier both not good cheers
Whats the exact error you see?
On firmware 10.2.0, the bad seed DLC gives me error anytime I try to install it. Used tinfoil and goldleaf, cant get it working. I am able to install the base game and v 1.10 fine.
Please help with bad seed DLC
Whats the exact error you see?
It says garbage file in Tinfoil. However i’ve tried the bad seed from all the major sites and it always says the same thing.
Install it via Gold Leaf.
with the 1.10.0 crush why? black screen
Whats your FW and CFW versions?
Can you help with the seed for the torrent? Got stuck at 50.1% 🙂
Thanks!
Its a small game i have no backups for seeding please download from Google Drive.
Hi. The MEGA link for the Bad Seed DLC links to an account that has been terminated. Thanks for the great work!
Please use Gdrive.
Sorry for the inconvenience, but here the new dead cells dlc will be the link to download, (if I don’t mind it is called ” barrels o’fun update ”. Thanks for your attention.
Can you share the link for that update?
I dont have.
ok then wait kindly.
sorry for misinforming admin, it was not dlc, it is update 2.0, sorry for the inconvenience.
just for info v1.9.1 is apparently out for switch.
Uploaded.
Any chance we’ll get the 1.9 update?
Is it officially out or planned for Switch?
Can you upload the update 1.5?
Why you need that old update?
Because My FW is still 9.2.1 and I don’t want to update it.
Update 1.7.2 is uploaded that can be used with FW 9.2.0
The Game does not load after the Nintendo Logo I used goldleaf installed all the DLC it just does not load. Can you Help
Update 10.0+ firmware is require in order to play latest update with DLCs.
Same problem here. Game works perfect on my switch with v.1.5 but after installing v1.8 game freezes at switch logo screen. V.9.2.0 and ams 12.0. I reinstalled the game with awoo and goldleaf and the problem persist.
Latest update 1.80 need Firmware 10.0.+ versions.
Hello, I can’t seem to launch the game. Before I installed the latest update it worked fine, but since v1.8.0 I just get a Black screen with the Nintendo screen Logo. I’m using sxos 2.9.4 firmware 9.2.0 and I tried installing with sx installer & goldleaf. Any ideas? Thanks
Update FW to 10.0+ versions it wont work on lower versions already tried and now uploaded a video above running game fine on FW 10.0.4.
Hi cant get the game work after launching i have the screen with switch /nintendo logo. I’ve already tried reinstall with goldleaf instead of awoo but it’s the same
Cant get the game after launching?
Did you installed the DLCs, Update?
Care to elaborate more?
Same issue for me. Installed all files (Base, Update 1.8, 2 dlcs). Launching the game sits you at the black screen with the nintendo switch logo and does not progress to the actual game. Tried installing base game, dlcs and then installing the update and no luck either.
Update Firmware to 10.0+ versions it wont work on 9.2 or below firmware versions.
after installing the game and dlc, the game wont start, only black screen and nintendo logo
Update 1.80 requires FW 10.0+ so update the console.
same problem, its like the game is stuck perpetually loading. The switch isn’t frozen, just stuck at the black starting screen you see when you open a game.
I’m trying to install a lower version but can’t figure out how to bypass the software update required message now
Update console firmware to 10.0+ versions it wont work on lower versions.
Hi, I’ve got the same problem. Got this combined XCI with required min firmware 10.0.2 for game version 1.8.0. Patched to lower version firmware (9.x) and getting the same black nintendo screen after launch (just before the title screen). Can version 1.8.0 actually run on firmware lower than 10.0.2?
You cant run it on 9.2 as no proper down patching method is currently available for this version.
same problem here! only this game stuck on switch and nintendo logo
Update console firmware to 10.0.4 or 10.0.2
i have the same problem. had to return to 1.7.1
Update console firmware to 10.0.2 or above ones. It will work fine i have tested it and uploaded a video above as a proof.
Latest Update is now out if you could kindly upload when you find it would be much appriciated.
Thank you
Done.
Thank you – you Legend
Welcome
Please upload 1.8.0 update sir. Thx
Added now.